BMW 5시리즈 수리 사례
2013년식 · F10 (2010-2016) · 520d
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 1. 작업
난이도 & 준비물
증상
Seems like I need to replace the struts and shocks on my 2013 528i xDrive. The shop quoted me a rather large sum for parts and labor, which led me to wonder if I can do this as a DIY project. I have some questions about it that I’m hoping someone on here can answer: When I search for replacement parts and specify my exact vehicle, I don’t seem to get many or any results, depending on the site. But when I drop the xDrive specification and search for just “2013 528i” struts and shocks I get what appears to be a few decent choices. Do both these cars in fact use the same type of shocks and struts
처리 내용
If you have your BMW dealer look up the parts, do they give you the same number or different numbers?
출처
이 사례는 CarTalk (미국)에서 수집한 데이터입니다.
신뢰도 2.5점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗BMW 5시리즈 다른 정비 사례
A “BMW screw” refers to a newly patented, logo-shaped fastener with recessed quadrants, designed to prevent DIY repairs by requiring a proprietary tool BMW Patent Reveals Branded Screw Design That Limits Access to Vehicle Repairs
25년식 2.0 가솔린 모델인데 요즘 와이프가 차 보험갱신할때가 되간다고 티맵점수 올려야 한다고 880킬로 넘게 끌고 다닌 연비가 18킬로가 넘었습니다. ㅋㅋ 2.0가솔린으로 그큰 덩치를.. 고속도로는 한번도안들어가고 국도 , 시내에서만 규정속도로만 몰고다녔다는데 이차사서 2.1만 킬로 끌고다닌중 최대 연비입니다.
연간 정기 점검 요청
주행거리 120,000km 도달. 공회전 시 약간의 이상음.
다른 차종의 쇼크업소버 교환 사례
차량 정보 없음
Hi, friends. Anyone know which of the two hoses on the power steering reservoir is the return line? I need to change the fluid in my 94 Camry with the 2.2 l. Alternatively, is there an easy way to differentiate between return and suction?
토요타 캠리
Steering wheel is becoming harder and harder to turn right or left
차량 정보 없음
Any chance someone can tell me what’s going wrong here. I’m used a titan 3/16 double flaring tool and nicopp. It keeps giving me this weird stepped flare. I’m not sure what to call this issue so I didn’t know what to look up. I’m doing my best to get a square cut, then I chamfer the outside with a file and chamfer the inside with a utility knife until there’s no burrs. I’m sort of worried that the screwing motion of the tool is messing with it somehow and instead I need a press tool. What’s weird is I did get one sort of good flare but couldn’t replicate it. It’s also made a few good flares us
차량 정보 없음
Does anyone here have experience with Front Steering and Suspension kits for older cars? [1] I’m helping a friend get a 1966 Mustang he inherited back up and running. The body is in nice condition. He’s looking at it as something to drive around locally, and not as a daily driver or for long trips. We got it running and it’s now registered. His front suspension is sloppy and loose, and has more steering play than it should, (even after tightening the steering box adj screw). The car is 1.5 hrs away from me, and we’re doing the work on his garage floor. We work on the car about twice a year. He