아우디 A4 수리 사례
2003년식 · B6 (2001-2004) · 2.0
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 31. 작업
난이도 & 준비물
증상
This is a thread about my first car which I've owned since 2003, it started life as a 1.3 8v Polo GT, all 75bhp and 800kg. Chapter 1 - The Early YearsI don t have many photos of my car standard, partly because it didn t spend much of its life in this state. However, there was a brief period I was content with cleaning it, polishing it and adding a few shiny dress parts. It looked like this:If ever there was a car that didn't have a clue what the next 23 years held for it... Shortly after passing my test, I bought a Wizards of Nos nitrous kit, and jetted it for about 80bhp and made my way down
처리 내용
Chapter 2 – Polo GT1I glossed over making the larger VW/Audi gearbox fit a small block VW, the Polo came with an 085 Transmission, 085 Transmissions have a reputation of being weak especially in higher powered boosted applications. Not surprising given the 084 is was based on had to handle 895cc of power and a lightweight Mk1. Add a little weight, and lots more power (about 4 or 5 times the amount of the Mk1) and it’s not surprising a 230bhp G40 will strip gears for fun.So far my 085 failures had been:• Inner CV Joint• 2nd Gear• 3rd Gear• 5th Gear• Diff/Final Drive BoltsTime for a change...Now a huge amount of work went into grafting an 02J from a Golf, onto a Polo engine.Summary of work done:- Bespoke Adapter plate- Bespoke driveshafts- Modified CV joints- Modified Wheel Hubs- Large amount of fabrication on the NSF and OSF chassis legs- Bespoke crank pulley- Bespoke alternator bracketry- Fabricated engine mounts- Bespoke gearshift cablesYada yada – I spent a year getting it to work, and it did indeed work!The Polo was then my wedding car, alongside some other family member’s motors:I did a few trackdays (with no gearbox failures!) and decided it was time to refresh the shell after a decade of me cutting, grinding and modifying it. A little bit of steel and a welder later:It’s mounted on a spit and ready for some work. A ‘refresh the chassis’ turned into:- Fit a 1.8T 20v (aim was circa 500bhp)- Fit a Tilton Pedal Box- Fit an ATL fuel cell- Make a flat-floor- Convert to EPAS - Additional roll cage tubes- Sill stands - Stitch weld chassis - Repair any rust along the way So it starts with removing underseal from the floor, all in a single integral garage, I was popular for a few years! After many hours of grinding I could make a plan for repair sections:For all the redundant holes I had some sheet laser cut to save time:And welded them into various places:Stitch welding the entire chassis was also on the to-do list:Next up some sill-stands with receivers integrated int
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗아우디 A4 다른 정비 사례
This is a thread about my first car which I've owned since 2003, it started life as a 1.3 8v Polo GT, all 75bhp and 800kg. Chapter 1 - The Early YearsI don t have many photos of my car standard, partly because it didn t spend much of its life in this state. However, there was a brief period I was content with cleaning it, polishing it and adding a few shiny dress parts. It looked like this:If ever there was a car that didn't have a clue what the next 23 years held for it... Shortly after passing my test, I bought a Wizards of Nos nitrous kit, and jetted it for about 80bhp and made my way down
This is a thread about my first car which I've owned since 2003, it started life as a 1.3 8v Polo GT, all 75bhp and 800kg. Chapter 1 - The Early YearsI don t have many photos of my car standard, partly because it didn t spend much of its life in this state. However, there was a brief period I was content with cleaning it, polishing it and adding a few shiny dress parts. It looked like this:If ever there was a car that didn't have a clue what the next 23 years held for it... Shortly after passing my test, I bought a Wizards of Nos nitrous kit, and jetted it for about 80bhp and made my way down
This is a thread about my first car which I've owned since 2003, it started life as a 1.3 8v Polo GT, all 75bhp and 800kg. Chapter 1 - The Early YearsI don t have many photos of my car standard, partly because it didn t spend much of its life in this state. However, there was a brief period I was content with cleaning it, polishing it and adding a few shiny dress parts. It looked like this:If ever there was a car that didn't have a clue what the next 23 years held for it... Shortly after passing my test, I bought a Wizards of Nos nitrous kit, and jetted it for about 80bhp and made my way down
우측 브레이크 등이 나감. 2003 Audi A4 1.8T, 주행거리 48,000마일. 딜러에서 10,000마일 주기 정기정비 견적 제시: 일반 서비스(오일 교환, 와이퍼액, 힌지 윤활, 엔진/라이트/진단 점검) $380, 세제 분사 노즐 막힘 해결 $45, 연료 분사기 $120, 스로틀 바디 $130, 브레이크 플루시 $130
다른 차종의 정기점검 사례
차량 정보 없음
insane build, bravo, looking forward to seeing this at a trackday at some point!
혼다 어코드
혼다 GX390 튠드 4행정 엔진 고카트에서 권장 오일량보다 20% 적게(0.8L, 권장량의 80%) 운전하면 엔진이 더 강력해지지만 더 빨리 손상된다는 튜너의 조언에 대한 의문
BMW 5시리즈
Edited by Ken986 on Thursday 20th August 22:28
차량 정보 없음
새 에어컨 증발기를 구입했는데 일부 핀이 구부러져 있습니다. 통관 검사 중에 종이 커터로 패키지가 손상되어 핀이 약간 눌리고 잘린 것으로 보입니다. 반품해야 할까요, 새 것을 받아야 할까요?