E3008 (2024-현재) · 일렉트릭 AWD
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 19. 작업
My word that is a styling disaster it s fugly.Reminds me of a cross between the Ford Probe and some Japanese motor I can’t remember the name ofEdited by GT4P on Wednesday 19th August 13:09
username_checksout said: 600 miles in this is 598 too many. It was featured in the hallowed Dream Cars book of the mid-80s and alongside the Strosek Porsches, Peugeot Quasar and Sbarro jacked-up Mk1 Golf with the 928 engine, this looked awful. Time has not been a healer and it still looks like the buck-toothed wang-eyed inbred cousin of the supercar world.Have Zagato made anything that is even okay to look at?DB4GT Zagato is lovely.https://www.pistonheads.com/news/ph-driven/aston-m...
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗Hello all,…. my first post on PH, so apologies if all is not as expected.I have found for sale an unsold ‘brand new’ Peugeot 5008 (actually, there are three), build year 2023; at what seems to be a very good price. However, the car is in Singapore and only shows 12km of driving. It still has the factory bodywork wrappers and the plastic seat covers on. It is the Allure Premium version, and with a full Panoramic opening/sliding roof and front heated seats.With all import duties, VAT, customs fees, delivery and licensing, etc; the total cost to me would be around £16,500 - providing nothing unto
Hello all,…. my first post on PH, so apologies if all is not as expected.I have found for sale an unsold ‘brand new’ Peugeot 5008 (actually, there are three), build year 2023; at what seems to be a very good price. However, the car is in Singapore and only shows 12km of driving. It still has the factory bodywork wrappers and the plastic seat covers on. It is the Allure Premium version, and with a full Panoramic opening/sliding roof and front heated seats.With all import duties, VAT, customs fees, delivery and licensing, etc; the total cost to me would be around £16,500 - providing nothing unto
푸조 106(S2) | 퀵시프트② | 공정1: 이전에 퀵시프트화를 위해 장착한 부품으로는 충분한 수준의 시프트 거리 단축을 달성하지 못했으므로, 추가로 거리를 단축할 수 있는 부품을 장착하기로 결정. COMPBRAKE 메이커의 부품 사용 | 공정2: 시프트로드는 순정품을 사용하기 위해 순정로드에서 볼을 제거 | 공정3: 그라인더를 사용하여 절단 홈을 만들면 쉽게 제거됨 | 공정4: 순정 볼을 제거한 후 순정로드를 COMPBRAKE 볼에 통과시킨 후 볼의 상하에 사진의 링을 사용하여...
푸조 206CC (카브리올레) | 이그니션 스위치 교환 | 과정1: 엔진 마운트 관련 작업을 완료한 후 블로어 모터가 완전히 정지. 약 1년 전부터 가끔 작동하지 않았지만, 키를 손전쪽으로 당기거나 뒤쪽으로 흔들면 통전되어 정상 작동했으므로 방치 중이었음. 이상 상태로 진행되면 엔진 시동 불가 또는 시동 후 정지 불가 등의 문제가 발생할 가능성이 있어 긴급 주문함.
지프 랭글러
헤드 개스킷 교체 후 P0016, P0017 코드 발생 (크랭크/캠 미정렬). 프론트 커버를 열어 체인이 한 톱니 어긋나지 않았는지 확인했으나, 쇼핑 매뉴얼에 초기 버전과 후기 버전이 표시되어 있음
포드 머스탱
2013 Ford Fusion 1.6 EcoBoost 직분사 엔진 - 시동 불가 상태. 스파크 플러그는 정상, 캠-크랭크 동기화 정상. 연료 공급 확인됨. 모든 실린더 압축 180psi 정상. MAP, IAT, ECT, RPM 등 라이브 데이터 모두 정상범위. 엔진이 회전하지만 시동이 걸리지 않음.
포드 에스케이프
포드 이스케이프에서 연료 레일 압력 관련 P0088 코드가 발생합니다. 코드는 보통 약 100마일 주행 후에 다시 나타나며, 즉시 발생하지는 않습니다.
토요타 캠리
Some great threads running at the moment.So, of the cars you have owned, which three were the most enjoyable to drive?Edited to add… runners up can be included Edited by baconsarney on Tuesday 1st September 10:46