아우디 R8 수리 사례
2세대 (2015-현재) · 5.2 FSI V10
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 10. 29. 작업
난이도 & 준비물
증상
That’s a nice little weight saving there whilst updating the cars tech.
처리 내용
Cadwell is one of my favourite circuits in the UK and it is a good place to test the R8 and get a baseline for how it's driving and highlight any issues I may have. As it was the first trackday in the car, I wanted to trailer it. Whilst driving to the circuit and back is something we'll be doing in the future, trailering it allowed me to take a few spares, some tools and a second set of wheels.Due to courier issues the tyres didn't arrive until Tuesday but my local tyre place was able to fit and balance them as well as clone the TPMS sensors from the existing wheels. This means I can swap the wheels and the car will think it's the same set so won't throw tyre pressure errors. The R8 can only have a limited number of sensors registered, so cloning the existing ones into the new wheels is the best way to sort it.For the road and when it's wet on track I'll be running Michelin PS4S in 245/35R19 on the front and 305/30R19 on the rear. In the dry I have a set of Michelin Cup2 in the same sizes. I'll be ordering a set of 18" wheels in the future so I can run used Porsche slicks (£20ea) and a set of A052's but for the next few trackdays I'll be sticking to these, more progressive tyres.I'd fitted the toolbox to the front of the trailer and I expected this would cause issues with the car being mid engined. Sure enough, even with the R8 almost touching, the tile bed wouldn't lower. The weight of the engine and gearbox on the back of the car was too high to balance. If you tried towing like this, the trailer would snake from side to side, not only is it awful to tow, it's dangerous.Even tilted, the front of the car would have touched the floor without the extra planks of wood to lift the wheels.Reversed on and the trailer is much better balanced. I'll be moving the box further forwards on a new bracket assembly which should allow me to drive on forwards.Took a couple of hours to get to Cadwell, towed without a problem. Being on backwards isn't particularly aerodynamic, but it
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗아우디 R8 다른 정비 사례
Fantastic car and write up. Looking forward to seeing how this unfolds.Thank you.
Lets start my new build thread with a photo of my previous car . I know, it`s not really the way these things usually start but I feel it's necessary to explain the plans and reasoning for buying the R8.I built my previous track car over 17 years, starting from a bare shell and learning a massive amount along the way until I ended up with a very fast Golf MK2 track car. The downside to this was that the more I developed the car, the less usable it became on the road. That wasn’t a big deal as I do a lot of track days in it, but recently things have changed.My wife and I are now very fortunate
Lets start my new build thread with a photo of my previous car . I know, it`s not really the way these things usually start but I feel it's necessary to explain the plans and reasoning for buying the R8.I built my previous track car over 17 years, starting from a bare shell and learning a massive amount along the way until I ended up with a very fast Golf MK2 track car. The downside to this was that the more I developed the car, the less usable it became on the road. That wasn’t a big deal as I do a lot of track days in it, but recently things have changed.My wife and I are now very fortunate
Lets start my new build thread with a photo of my previous car . I know, it`s not really the way these things usually start but I feel it's necessary to explain the plans and reasoning for buying the R8.I built my previous track car over 17 years, starting from a bare shell and learning a massive amount along the way until I ended up with a very fast Golf MK2 track car. The downside to this was that the more I developed the car, the less usable it became on the road. That wasn’t a big deal as I do a lot of track days in it, but recently things have changed.My wife and I are now very fortunate
다른 차종의 정기점검 사례
메르세데스-벤츠 C클래스
Hope this is in the right place. I couldn't see another location that fitted this tbh. Hello All,Project here with, well, my project. I know a lot of you like a build thread so I'm bringing you one with a slight difference. It's much bigger than you will be used to. And not because I'm trying to push a Merlin engine into a Lamborghini SV. It's because it weighs 12 tons, has four wheel drive and locking diffs and will eventually go around the world (hopefully). Sadly it will only 56mph, but 15mpg to the gallon it won't feel far off the usual pistonhead fill up experience The idea is to take a m
메르세데스-벤츠 C클래스
Hope this is in the right place. I couldn't see another location that fitted this tbh. Hello All,Project here with, well, my project. I know a lot of you like a build thread so I'm bringing you one with a slight difference. It's much bigger than you will be used to. And not because I'm trying to push a Merlin engine into a Lamborghini SV. It's because it weighs 12 tons, has four wheel drive and locking diffs and will eventually go around the world (hopefully). Sadly it will only 56mph, but 15mpg to the gallon it won't feel far off the usual pistonhead fill up experience The idea is to take a m
차량 정보 없음
큰 프로젝트입니다. 더 많은 정보가 곧 올 예정입니다.
차량 정보 없음
Oh yes - love it