폭스바겐
쇼크업소버 교환미국 · Stack Exchange★ 신뢰도 4.1 (높음)

폭스바겐 골프 수리 사례

2006년식 · MK5 (2003-2008) · 2.0 GL

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 7. 14. 작업

난이도 & 준비물

난이도 보통⏱ 예상 120~240🔧 리프트🔧 특수공구

증상

2006 VW Golf 프론트 두 개의 스프링에서 침대 스프링 같은 삐걱거리는 소리 발생. WD40를 분무해도 효과 없음. 계절에 따라 변함 (특히 여름에 더 조용함). 작은 범프마다 삐걱거림.

처리 내용

코일 스프링에서 삐걱거리는 소리는 스프링이 다른 부품과 접촉하는 부분에서만 발생함. WD40 분무가 효과 없는 이유는 이것 때문임. 스프링의 상단 및 하단 시트(seat)를 확인할 것. 이 시트들이 마모되어 있을 수 있음 (완전히 손상되지는 않았더라도 스프링이 앉는 부분이 불균등해져서 움직임 발생). 서스펜션을 정비한 적이 있다면 스프링과 시트가 제대로 맞지 않을 수도 있음. 이러한 움직임이 삐걱거리는 소리를 유발함. 시트의 마모 또는 불일치를 확인하고 필요시 교체 권장.

출처

이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

다른 차종의 쇼크업소버 교환 사례

포르쉐

포르쉐 카이엔

M138 said: Clad-Hach said: For me everything about Maserati screams run a mile, why would anyone buy a car from a brand with a reliability record arguably worse than a JLR product.Yes some of them look good but if you're stuck on the hard shoulder that would be the last thing on your mind.If you take a similar vintage Porsche 996 compared to a Maserati 4200, the Maserati engine is bulletproof compared to the Porsche engine. Where Maserati falls short is something like a suspension part on a Maserati 4200 that is nla.The availability or price of parts on a Maserati can quite rightly receive c

미니

미니 쿠퍼

하부 볼 조인트가 녹슬고 손상되어 있으며, 여러 부품들이 부식된 상태. 분해 및 해체 작업 진행 중.

토요타

토요타 코롤라

Ste372 said: pocketspring said: The Celica had it's own engine line up, the 4AGE wasn't used in them. It was used in the Corolla GTi though.Yes I know it wasn't used in the Celica what I'm getting at is it would of upset the applecart. If it had a 4age in it. It would of been as quick, if not quicker than the Celica so why would anyone have spent double on buying a Celica every car has its place in a manufacturers line up. This was placed in the budget friendly coupe. Do you think putting the 1.6L 112bhp 4AGE engine in the Paseo would have made it quicker than the 2.0L 173bhp 3SGE engine mk6

BMW

BMW 5시리즈

mwstewart said: I'm going to treat it to a set of Bilstein B8 dampers and new OEM springs.I'm a bit surprised that Mr "American-spec non-sport" is planning to buy some B8 dampers:1. I can't recall whether you've fitted lowering springs to the Corsa (or if the ecoFLEX model is fitted with them as standard), but aren't B8s for cars with lowering springs, whereas B6s are for standard springs?2. When various BMW guys on here fit Eibach lowering springs to their cars, they tend to fit B4S dampers as they've found B8s to be too firm.