정기점검PistonHeads★ 신뢰도 4.1 (높음)

스바루 임프레자 수리 사례

6세대 (2017-현재) · 2.0i

총 비용

공임

부품비

소요 시간

2026. 9. 9. 작업

난이도 & 준비물

난이도 쉬움⏱ 예상 60~120분🔧 전용 진단기

증상

anyideas said: Marquezs Stabilisers said: Parts wise, DL Motorsport and Import Car Parts take my money for new Impreza bits. Good breakers on Facebook too Thank you, I knew about ICP but not DL Motorsport. I’ll take a look. Hadn't heard of DL before, thanks for the pointer. Nice to see they do a rear quarter panel for 4 door GC8s - but the rarity comes at a hefty price!https://www.dlmotorsportparts.co.uk/body-trim-inte...

처리 내용

Cambs_Stuart said: This looks fantastic. Really enjoying seeing how thoroughly you're going over this. While we're talking about subaru suppliers that we've spent too much money with, AS performance are really good, keenly priced and very knowledgeable. Website is awful though, so contact them directly. Wow are they still going? Alun I think the guy was, ordered a fair bit him a fair bit probably 10 years or so ago now, how he worked was pretty old school even then, pretty much all by phone, but he had so much knowledge and a very straight forward guy, always enjoyed talking to him.Great work on the car so far OP, looking good now underneath. How bad were the inner sills? I remember on my UK car when the MOT guy told me it had failed and to come take a look, you could pretty much get your fist through the hole!I clocked you remember reading about the RB5 in EVO, as it happens I got my RA featured in EVO, something I'm still proud of and was a cool experience. I saw Henry Catchpole at Goodwood the other year, funny as i can still recognise him a long way off but very much doubt he'd remember me now!

출처

이 사례는 PistonHeads에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

스바루 임프레자 다른 정비 사례

2.0i

스바루 레보그(VN) 스마트폰 충전기 설치 공정 1: 센터콘솔에 휴대폰 충전용 트레이 설치. 인터넷의 CROSTREK용 트레이 3D 데이터를 기반으로 Qi2 충전기를 매장하고 트레이 깊이를 얕게 했음. 비오는 날에 프린팅해서 습기로 인해 프린팅 품질이 저하되고 군데군데 거칠어진 부분 있음. | 공정 2: 콘솔박스 내부에 USB 포트 설치. 여기서 충전기 전원을 공급받고 있음. USB 설치 시 USB측 내경상 구멍 돌출부를 깎으면 부착 가능할 것으로 예상됨...

2.0i

스바로 플레오(RA/RV) 타이로드 엔드 교체 작업. 프론트 액슬에서 타이로드 엔드 분리 (타이로드 엔드 풀러 사용). 부츠 열화는 없는 상태이며, 볼조인트 유격도 수동으로 움직였을 때 뚜렷하지 않음.

2.0i

스바루 임프레자(해치백)(GU) | 12개월 점검 | 공정1: 12개월 점검 실시. 주행거리: 1800km 미만. 주행거리가 짧아서 브레이크 분해 청소 진행.

2.0i

스바루 프레오(RA/RV) MT 시프트 레버 부시 교체 작업. 시프트 감각이 불명확해져서 시프트 레버 부시를 교체함. 교체 부위는 파란 원 표시 부분(MT측 유니버설 조인트 같은 부분의 축 볼트 제거 후 부품 제거). 신구 부시를 비교했을 때 오염 외에는 변형, 마모, 열화 여부가 불명확함.

다른 차종의 정기점검 사례

차량 정보 없음

Romeford said: Thank you. Mrs Romeford has accepted that she now has to share me! I think she could easily be a rust bucket or a pristine example. It's down to me where she ends up and I get to learn spanners! I do wonder what she will be like when all the jobs are done! Is this Mrs Romeford or Francesca you’re now referring to? …….

메르세데스-벤츠 C클래스

Glad you're ok, and a warm welcome to the 'Small car vs Mercedes 4x4' club. Membership is now 2 of us . I was in my Smart Fortwo and got rear ended by a Mercedes ML. Hopefully the Twizy is fixable.

차량 정보 없음

EmilA said: Ah that s a shame, hope everything s ok for the OP.On a side note, my ZC33S will be going up for sale soon, need a bigger car let me know details etc as im in the market as i'm selling my 32 track car for one

포르쉐 카이엔

Next up, we can't go past Switzerland without hitting some passes:https://maps.app.goo.gl/UdFDabEdEW6LpAdr8We leave Bolzano and suck up single lane Italian life. There are heaps of Apple orchards as we go further up into the mountains with some funny little tractors pulling apple carts going the other direction. We laugh. Then a less funny little tractor pulling apples pulls out in front of us and proceeds to do 30kph and it's way to busy to get past him. We don't laugh. Up the top of whatever traffic clogged pass this is there's the sight we've come for. "Luigi, you gonna be in a lotta troubl