2023년식 · 9YA (2017-현재) · 3.0 V6
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 15. 작업
After more than ten years of E36 tinkering, many engine iterations and lots of seat time from track days to racing, it was time so start something new. An accident in the E36 at Cadwell Park in April 2023 was the ultimate deciding factor for this. The car was repairable, but it's fate was already decided - break it for parts and retain what I needed, then sell the rest to fund the next project. It's final spec is listed in the video description if you are interested. The platform and interchangeability of the M5x engine parts will never go away, but fun was had and it was time to move on. |
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗chris1roll said: Yesterday I pulled up behind a Carrera in lane 2 at some traffic lights, with a car towing a caravan in lane 1.The caravan had been trundling along rather slowly prior to this.Lane 2 merges into lane 1 'shortly' afterwards, before the speed limit then increases.There would have been time and space to quite safely get 5 or 6 cars past with only 'normal' accelleration, but what does Carrera man do? Fail to move at all until the caravan is half a car length ahead, then pull away and simply match it's speed until the last possible moment before the merge, then boot it in front le
NGK210 said: Yes, Henry and Harry have pukka aotomotive journo chops and are good in front of the camera. But, both suddenly become timid when in the presence of big guns. For example, compare Henry s take on the Porsche- / Preuninger-hosted preview of the 991 (992?) GT3 with Harris s. Henry was starstruck and followed the PR script to the point of tedium. Whereas Harris went well off piste, and his GT3 preview was the more interesting TV moment . Similarly, Harris literally sits down and has a few bevvies and a laugh with Singer s Dickinson and Fawaz, whereas others simply fawn. Harry is di
포르쉐 718 박스터(982) | 트렁크룸 단열 | 작업 1단계: 여름철 기온이 도시에서 39도까지 올라가면서 리어 트렁크가 엔진열과 햇빛으로 인해 아이스크림을 보관할 수 없는 상태. 프론트 보닛 안쪽에는 단열재(인슐레이터)가 거의 없음. 여러 제품을 찾아본 결과 이 제품을 선택함. | 작업 2단계: 먼저 리어 트렁크 내부에 재료를 자르고 트렁크를 열었을 때 보기 좋게 부착함. 이후 엔진 격벽(파이어월)도 고려했으나 열어본 결과 부착이 어려울 것으로 판단되어 다른 방법을 검토 중
These things look great. If you can get one where someone has already spunked £20k on the paint, then happy days.Just not keen on the laptop stuck to the dashboard.
포르쉐 카이엔
NGK210 said: Yes, Henry and Harry have pukka aotomotive journo chops and are good in front of the camera. But, both suddenly become timid when in the presence of big guns. For example, compare Henry s take on the Porsche- / Preuninger-hosted preview of the 991 (992?) GT3 with Harris s. Henry was starstruck and followed the PR script to the point of tedium. Whereas Harris went well off piste, and his GT3 preview was the more interesting TV moment . Similarly, Harris literally sits down and has a few bevvies and a laugh with Singer s Dickinson and Fawaz, whereas others simply fawn. Harry is di
차량 정보 없음
I need to make some gears/pinions myself. I have access to a high quality 4-axis CNC mill, but not to a lathe. I'd like to cut these gears out of flat stock (facing), rather than round (edgewise) using narrow end mills. Being able to prototype this in plastic sheets is important to me. I've found a bunch of sites that explain hobbing and that have formulas for pitch etc, but no sites that actually generate the splines for the gear teeth to turn into Gcode. Before I sit down with Mathematica and derive it from first principles, does anyone know of a good resource for this?
쉐보레 말리부
1997 Chevy Blazer 4WD 4.3L V6 - 트랜스미션 팬에 구멍이 있어서 누유 발생
차량 정보 없음
I don't have the capabilities to take a pic right now.