총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 11. 작업
Seeing as it went to the PH annual service yesterday, I figured it was about time a thread was started to cover my ownership.Full history on background etc. coming soon but suffice to say it was a boyhood poster car that I never thought I'd have chance to own. Turns out dreams can come true.Oh and before anyone suggests it, yes Clarkson and that clip had a hand, but so did Guy Martin... IYKYK Anyway, the car in questionIt's a fairly subtle spec:- 2014 (Built in July 2013) Aston Martin Vantage V12S- #21 built- 7 Speed Sportshift III- Quantum Silver exterior- Obsidian black leather seats, with s
Thanks both.With regards to the surrounding of VWs, that was at a Cars & Coffee event at Type2 Detectives in Cambridgeshire. They kindly did the mechanicals/fit out on my brothers '65 split screen bus and have since opened up a coffee shop with regular meets. Worth a visit if you're ever passing.With regards to plans for the Aston, read on... So back to the beginning. I actually purchased it back in November last year. I was between jobs at the time but was due to start the next one couple of weeks later, given I had time on my hands I was doing the usual browsing of Car & Classic as you do it when afflicted and it happened to throw this one up. After double-checking myself a few times given it was in budget and looked to be a good spec with a few choice options, I called and arranged to see the car. Fortuitously I was travelling south that week to see the folks so a diversion the other way around the M25 was no real hardship On arrival and my first sighting of the car was that it was thankfully undercoverI spent a good two hours going over things, which as to be expected wasn't completely perfect given it had covered just over 58,000 miles... oh yes, this thing has been used.Bad points:- Heavy condensation in both rear lamps- Headlights looked like they'd been cleaned with a scotch pad- A few minor stone chips on the front bumper- Front splitter had a possible crack in the centre, but it was also fully covered over by a 'carbon effect' wrap, for protection or to hold it together, who knows.- Tyres had reasonable tread but the rears were probably down to c4mm- Mesh grill had a few rust spots/marks- Lower 'start' section of the key insert had fallen out- Only one key, thankfully it was the crystal one but it had had a life- Engine bay was a little untidy/dusty- Small crack on the waterfall dash behind the nav screen- Door rubbers looked tired and cracked in a few places- Front right alloy had a couple of minor curb marks- Two of the brake bleed nipples were rusty and
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗닷지 챌린저
2015 Dodge Ram 6기통 디젤 엔진 교체 후 심한 진동 발생. 원래 엔진은 17,000마일에서 고장남. 견인 시 파크 상태에서 약 2.4m 끌려감.
차량 정보 없음
89 S10 Blazer, 4.3L V6, AC 장착. 히터를 켠 상태에서 시동을 걸면 후드에서 딱딱거리는 음이 남. 검사 결과 AC 클러치 디스크가 반복적으로 회전했다가 갑자기 멈춤. 서펜타인 벨트는 정상적으로 회전함.
토요타 캠리
Toyota-IV 규격 변속기유를 사용하도록 제조사가 지정한 변속기에 다목적(Multi-Vehicle) ATF를 사용할 수 있는가?
차량 정보 없음
취미 프로젝트로 트랜스미션 수리 중. Haynes/Chilton 매뉴얼에는 트랜스미션 수리 정보가 없고, 트랜스미션 수리 매뉴얼은 차량 모델이 아닌 트랜스미션 모델별로 판매됨. 어떤 트랜스미션을 가지고 있는지 식별하기 어려움. 트랜스미션 측면에 많은 번호가 있는데 어느 것이 트랜스미션 자체를 식별하는지 모름. 부품 번호로 보이는 것: 6C2P 7000 AA FFAQ (또는 52CP일 수도 있음. 정확히 확인 어려움)