토요타 캠리 수리 사례
2000년식 · XV20 4세대 (1996-2001) · 2.2 LE
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 31. 작업
난이도 & 준비물
증상
2000년식 Toyota Camry LE, 주행거리 147,000마일. 주차, 중립, 후진 시에는 정상음이지만 전진기어(D, 2, L)에 들어가면 뚜렷한 휘파람/윙윙거리는 소음 발생. 공기 흡입음으로 추정됨.
처리 내용
청진기를 이용한 진단을 추천합니다. 누군가 운전석에 앉아 비상브레이크를 적용하고 브레이크를 밟은 상태에서 드라이브 기어에 넣으세요(타이어 고정도 추천). 청진기를 사용하면 소음의 정확한 위치를 파악할 수 있습니다. Intake hose, Throttle body, Intake manifold, 진공라인(Vacuum line), Exhaust manifold, 배기파이프 등을 차례로 확인하세요.
출처
이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗토요타 캠리 다른 정비 사례
Some great threads running at the moment.So, of the cars you have owned, which three were the most enjoyable to drive?Edited to add… runners up can be included Edited by baconsarney on Tuesday 1st September 10:46
Some great threads running at the moment.So, of the cars you have owned, which three were the most enjoyable to drive?Edited to add… runners up can be included Edited by baconsarney on Tuesday 1st September 10:46
Some great threads running at the moment.So, of the cars you have owned, which three were the most enjoyable to drive?Edited to add… runners up can be included Edited by baconsarney on Tuesday 1st September 10:46
Some great threads running at the moment.So, of the cars you have owned, which three were the most enjoyable to drive?Edited to add… runners up can be included Edited by baconsarney on Tuesday 1st September 10:46
다른 차종의 변속기 오일 교환 사례
포르쉐 카이엔
NGK210 said: Yes, Henry and Harry have pukka aotomotive journo chops and are good in front of the camera. But, both suddenly become timid when in the presence of big guns. For example, compare Henry s take on the Porsche- / Preuninger-hosted preview of the 991 (992?) GT3 with Harris s. Henry was starstruck and followed the PR script to the point of tedium. Whereas Harris went well off piste, and his GT3 preview was the more interesting TV moment . Similarly, Harris literally sits down and has a few bevvies and a laugh with Singer s Dickinson and Fawaz, whereas others simply fawn. Harry is di
차량 정보 없음
I need to make some gears/pinions myself. I have access to a high quality 4-axis CNC mill, but not to a lathe. I'd like to cut these gears out of flat stock (facing), rather than round (edgewise) using narrow end mills. Being able to prototype this in plastic sheets is important to me. I've found a bunch of sites that explain hobbing and that have formulas for pitch etc, but no sites that actually generate the splines for the gear teeth to turn into Gcode. Before I sit down with Mathematica and derive it from first principles, does anyone know of a good resource for this?
쉐보레 말리부
1997 Chevy Blazer 4WD 4.3L V6 - 트랜스미션 팬에 구멍이 있어서 누유 발생
차량 정보 없음
I don't have the capabilities to take a pic right now.