MK8 (2019-현재) · 1.5 eTSI
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 15. 작업
골프 MK5 후방 코일 스프링 교체 시 상단 및 하단의 러버 퍼치(스프링 패드) 부품 번호를 찾을 수 없음. 다이어그램에서 상단(부품 1)과 하단(부품 3)에 러버 퍼치가 있는 것으로 확인됨.
상단 스프링 패드 부품 번호: 1K0 512 149 B / 하단 스프링 패드 부품 번호: 1K0 512 297 C
출처
이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗2011 유럽형 VW 골프 Mk6 Variant, 2.0 TDI 엔진 (CFHC 엔진 코드, Euro 5 배출가스 기준, DPF 장착, AdBlue 미장착, 4Motion 미장착)에 약 200,000km 주행. 지난 5년간 5W-30 엔진오일 사용해옴. 백야드 정비사가 높은 주행거리를 이유로 5W-40으로 변경할 것을 권장함. 변경해도 장기적으로 엔진에 부정적 영향이 없는지, 올바른 결정인지 확인 필요.
Mk1 Golf/Rabbit의 드라이브 플랜지에 서클립을 설치 중입니다. 플랜지의 원뿔형 형태로 인해 서클립 플라이어로 접근하기 어렵고, 드라이브 샤프트에서 플랜지를 압축하고 고정하기 위해 기어 풀러를 사용해야 합니다. 설치 과정에서 서클립을 약간 구부려서 약간 타원형이 되었습니다. 현재 끼워져 있고 잘 잡고 있지만, 서클립을 너무 많이 구부린 건 아닌지 궁금합니다.
이틀간 차고에 주차한 후 시동을 걸려고 했으나 시작이 안 됨. 엔진이 몇 번 컥거렸지만 완전히 시동이 걸리지 않음. 주행 휠 기호가 점등되어 있음. 비디오 영상에서 보이는 현상: 엔진이 회전하지 않고 스타터가 딸깍거리는 소리만 남.
앞 타이어가 뒷 타이어보다 눈에 띄게 찌그러져 보입니다. 제 차는 전륜구동이고 앞 바퀴에 더 많은 무게가 실려있습니다. 앞 타이어의 압력을 더 높여야 하나요? 앞뒤 타이어의 마모 정도가 다를까요?
포르쉐 카이엔
M138 said: Clad-Hach said: For me everything about Maserati screams run a mile, why would anyone buy a car from a brand with a reliability record arguably worse than a JLR product.Yes some of them look good but if you're stuck on the hard shoulder that would be the last thing on your mind.If you take a similar vintage Porsche 996 compared to a Maserati 4200, the Maserati engine is bulletproof compared to the Porsche engine. Where Maserati falls short is something like a suspension part on a Maserati 4200 that is nla.The availability or price of parts on a Maserati can quite rightly receive c
미니 쿠퍼
하부 볼 조인트가 녹슬고 손상되어 있으며, 여러 부품들이 부식된 상태. 분해 및 해체 작업 진행 중.
토요타 코롤라
Ste372 said: pocketspring said: The Celica had it's own engine line up, the 4AGE wasn't used in them. It was used in the Corolla GTi though.Yes I know it wasn't used in the Celica what I'm getting at is it would of upset the applecart. If it had a 4age in it. It would of been as quick, if not quicker than the Celica so why would anyone have spent double on buying a Celica every car has its place in a manufacturers line up. This was placed in the budget friendly coupe. Do you think putting the 1.6L 112bhp 4AGE engine in the Paseo would have made it quicker than the 2.0L 173bhp 3SGE engine mk6
BMW 5시리즈
mwstewart said: I'm going to treat it to a set of Bilstein B8 dampers and new OEM springs.I'm a bit surprised that Mr "American-spec non-sport" is planning to buy some B8 dampers:1. I can't recall whether you've fitted lowering springs to the Corsa (or if the ecoFLEX model is fitted with them as standard), but aren't B8s for cars with lowering springs, whereas B6s are for standard springs?2. When various BMW guys on here fit Eibach lowering springs to their cars, they tend to fit B4S dampers as they've found B8s to be too firm.