G87 (2022-현재) · M2 수동
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 9. 10. 작업
BMW 5시리즈 투어링(G31) 페달 커버 설치 작업 중 증상 기록: 우측 페달과 좌측 페달의 높이 차이를 줄이기 위해 페달 커버 설치 진행 중. 액셀 페달 유닛 분리 완료(T30 톱니로 제거). 페달 커넥터 분리 - 배선은 길지만 클립은 단단했으나 분리는 문제없음. 페달에 화이트로 위치 마킹. 스페이서 없이 커버 설치 시 우측 페달이 약 5mm 전진 위치로 조정됨. 브레이크 페달이 단단한 상태.
BMW 5시리즈 투어링(G31) 페달 커버 설치 완료(G87 M2와 동일한 고정 방식 적용). 액셀 페달 유닛 분리 - T30 톱니로 제거. 페달 커넥터 분리 - 배선 길이 확인 후 클립 조심히 해제. 페달 위치 마킹 후 커버 정렬. 스페이서 없이 설치하면 우측 페달이 약 5mm 앞으로 나감(필요시 스페이서 두께 조정). 브레이크 페달 작동 확인 필요 - 페달 간섭 또는 단단함이 있으면 스페이서 조정 또는 설치 위치 재확인.
출처
이 사례는 みんカラ (일본)에서 수집한 데이터입니다.
신뢰도 3.0점(보통) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗keo said: Haha!That s the way to do it! I sold a car on the Friday once, said I wasn t rushing into anything. Bought a new car Tuesday I was very close to going ahead with something else, and then something even better popped up and here I am geeks said: Unfortunately it says I can't view that content in my region! No idea why200Plus Club said: Well done, interested to see what it is. Cheers! I suspect it might be a bit of a marmite choice for some!
BMW M2 쿠페(F87) | 오일 첨가제 주입 | 공정1: Prostaff 몬스터 엔진 디펜더 D-79 오일 첨가제 주입 완료 | 공정2: 주행거리 96721km
_Neal_ said: I'd be a bit concerned about running a 12 year old car with carbon brakes so you'd want to have them inspected pre-purchase - it's not like you're going to track it so it seems an unecessary roll of the dice cost-wise. They're (obviously) expensive cars to maintain regardless, but add on £800/year tax, 20mpg @ £2/litre, Audi's notorious decision to be absolutely terrible at parts provision as things get over 10years old (especially RS side) makes it even more of a potentially risky, expensive proposition.You'd have to really want one. Shame, as this is much nicer than their mode
GT9 said: CH80 said: The Italians teach the plucky Brits and object lesson in design and soul, once again. I mean, after the jaguar bks this thing is light shone into darkness. Meh.Here s a Jaguar object lesson in design, soul, light in the dark, etc.Like the Alfa it will also never get made.Saw a CX-75 in the flesh at Goodwood many years ago. Made literally everything else there look really REALLY dull