총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 9. 2. 작업
I'm attempting to do some DIY car repairs from my driveway, and need to remove the vehicle's AC condenser. To do so, I need to evacuate the r134a refrigerant from the AC system. Apparently it is the norm even at some auto shops to vent this refrigerant into the atmosphere, despite its high potential as a greenhouse gas and resulting legal penalties. I would like to avoid this method. I've sourced a very old and very cheap Amprobe ProMax RG5000E refrigerant recovery machine, hoses and a tank for the job, and recycling service willing to dispose of it properly, and I have been studying the manua
If your condenser coil is damaged, refrigerant was released and your system is most likely empty. Connect gauges to both service ports to see if any pressure remains. Designed as a refrigerant recovery machine, it's not a refrigeration vacuum pump. Recovering refrigerant is required following EPA regulations against releasing refrigerant into the atmosphere. In America, refrigeration repairs must use refrigerant recovery whether repairing vehicles or commercial hvac systems using large amounts of refrigerant. EPA fines can be substantial if businesses are found to deviate from recovering refrigerant, releasing it into the atmosphere. In practical terms, every vehicle with ac eventually releases refrigerant whether from a crash rupturing a system or service during repairs. Every ac system is considered sealed at factory assembly, refrigerant under pressure when ac isn't used. 98% of ac problems are leaks occurring from everyday driving. This simply means refrigerant escapes....... from
출처
이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗미니 쿠퍼
re. the refrigerant - If you take the car to Quik-Fit they will empty the system for free (probably best to ring first to check but I've done it on a few cars..). This is actually a requirement if you work on the AC system of a car as the gas is pretty nasty for you and the environment.Once that's done it's pretty simple, just nuts n bolts but do fit a replacement drier though if you're opening the system up.
차량 정보 없음
https://www.autotrack.nl/a/citroen-cx-benzine-1988...Delightful.
차량 정보 없음
96 Prelude의 AC 컴프레셔가 손상되었습니다. Hadsys 모델 HS-090L 신품 또는 리만 컴프레셔를 구할 수 없는 상태입니다.
차량 정보 없음
오래된 냉매 스케일이 고장 났으므로 새 제품을 찾고 있습니다. 충전 제어 기능이 없는 스케일만 필요하고, 50lb 회수 탱크를 수용할 수 있어야 합니다. 추천 제품이 무엇인가요?