2011년식 · E90 (2004-2011) · 320i
총 비용
180,000원
공임
70,000원
부품비
110,000원
소요 시간
60분
2026. 2. 7. 작업
코너링 시 딸깍 소리, 직진 주행 시 진동
전륜 스태빌라이저 링크 볼조인트 마모. 유격 과다. 부시 정상.
전륜 스태빌라이저 링크 좌우 교체. 얼라인먼트 확인 후 이상 없음.
토요타 캠리
Vehicle is 2006 Toyota Sienna AWD. I changed struts and sway bar link arms and then got alignment done, shop said steering is "returning from the right too fast." They said the alignment was all green, but maybe the ball joint castle nut was torqued too tight. I tried loosening the castle nut by one notch but this did not change anything. What can I adjust to fix this? Do I need ball joints?
혼다 어코드
Trying to DIAG possible worn out sway bar bushings on a Honda Accord. On this car, the bushings appear to be molded/formed directly to the sway bar, and you are not supposed to attempt to replace just the bushings, and get a brand new sway bar. I would like to confirm that the sound I am hearing is coming from the bushings. Is there any safety issues with temporarily disconnecting the sway bar links, to see if the sound goes away, as long as I drive around turns very slowly? The service data says to use Honda tool VSB02C000016, which appears to be a front subframe adapter for a transmission ja
혼다 어코드
2020 Honda Accord, 120k miles on it. I hear a scrape and pop sound when going over bumps and a metal scrape when turning. Sound appeared to be mainly coming from the front and back on both sides. Dealer had said it was front struts, bearing within the mounts, and also listed an line item for “sway bar link kit (front) - Replace ADD SWAY BAR BUSHING” for ~$600. The sway bar bushing is molded to the sway bar, so you can’t replace just the sway bar bushings. Replacing the sway bar on this car requires lowering the front subframe. So I am not exactly sure what that line item was referring to. I as
차량 정보 없음
Rust belt, gasoline Engine, Stored Outside Preparing my car for storage for less than a year. Got a full tank of gas, added fuel stabilizer and drove home. Changed oil and filter. Air in tires, put battery on a trickle charger. I did not use any fogging oil. What should I do now? Been sitting for about 2 months. Should I go ahead and pull the spark plugs, and add some fogging oil to each cylinder, not start the car and continue to lit it sit the rust belt winter out? Should I not worry about it at all? How long of a storage would I need to use fogging oil vs when is it not necessary? I am seei