포드
쇼크업소버 교환미국 · Stack Exchange★ 신뢰도 4.1 (높음)

포드 머스탱 수리 사례

S650 (2024-현재) · 2.3T EcoBoost 자동

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 7. 18. 작업

난이도 & 준비물

난이도 보통⏱ 예상 120~240🔧 리프트🔧 특수공구

증상

눈이 많이 쌓인 도랑을 통과한 후 운전석 앞 휠(여객석측)이 심하게 휜 상태입니다. 휠의 런아웃(runout)이 상당하고, 운전 중 스티어링 휠 진동이 심하며 휠 얼라인먼트가 맞지 않는 것으로 보입니다.

처리 내용

휠 수리 전문점을 찾아 의뢰하세요. 손상된 휠은 타이어를 제거한 후 머신에 올려 원래 형태로 휘어낸 후 복구합니다. 균열이나 응력 손상도 함께 검사하여 원래 강도로 복구합니다. 일반적으로 휠 교정 및 도장 비용은 휠 크기와 손상 정도에 따라 다르지만 약 $70/휠 정도입니다. 시공 시간은 보통 1~1.5일 정도 소요됩니다. 수리점에서 휠에서 타이어를 벗기므로 따로 조치할 필요 없고, 여분의 타이어를 장착한 후 휠을 제거하여 가져가면 됩니다. 반환받은 휠은 새것처럼 복구됩니다.

출처

이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

다른 차종의 쇼크업소버 교환 사례

포르쉐

포르쉐 카이엔

M138 said: Clad-Hach said: For me everything about Maserati screams run a mile, why would anyone buy a car from a brand with a reliability record arguably worse than a JLR product.Yes some of them look good but if you're stuck on the hard shoulder that would be the last thing on your mind.If you take a similar vintage Porsche 996 compared to a Maserati 4200, the Maserati engine is bulletproof compared to the Porsche engine. Where Maserati falls short is something like a suspension part on a Maserati 4200 that is nla.The availability or price of parts on a Maserati can quite rightly receive c

미니

미니 쿠퍼

하부 볼 조인트가 녹슬고 손상되어 있으며, 여러 부품들이 부식된 상태. 분해 및 해체 작업 진행 중.

토요타

토요타 코롤라

Ste372 said: pocketspring said: The Celica had it's own engine line up, the 4AGE wasn't used in them. It was used in the Corolla GTi though.Yes I know it wasn't used in the Celica what I'm getting at is it would of upset the applecart. If it had a 4age in it. It would of been as quick, if not quicker than the Celica so why would anyone have spent double on buying a Celica every car has its place in a manufacturers line up. This was placed in the budget friendly coupe. Do you think putting the 1.6L 112bhp 4AGE engine in the Paseo would have made it quicker than the 2.0L 173bhp 3SGE engine mk6

BMW

BMW 5시리즈

mwstewart said: I'm going to treat it to a set of Bilstein B8 dampers and new OEM springs.I'm a bit surprised that Mr "American-spec non-sport" is planning to buy some B8 dampers:1. I can't recall whether you've fitted lowering springs to the Corsa (or if the ecoFLEX model is fitted with them as standard), but aren't B8s for cars with lowering springs, whereas B6s are for standard springs?2. When various BMW guys on here fit Eibach lowering springs to their cars, they tend to fit B4S dampers as they've found B8s to be too firm.