볼보
머플러 교환미국 · Stack Exchange★ 신뢰도 4.1 (높음)

볼보 XC90 수리 사례

P2 (2015-현재) · B6 AWD

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 7. 17. 작업

난이도 & 준비물

난이도 보통⏱ 예상 60~120분🔧 리프트🔧 특수공구

증상

볼보 XC90 2.5T AWD의 순정 머플러 대체품을 찾고 있음. 같은 파워트레인을 사용하는 다른 볼보 차량들이 있지만 국내 머플러 샵에서 애프터마켓 머플러를 취급하지 않음. OEM 머플러 가격이 약 $800으로 비쌈.

처리 내용

배기 시스템의 모델별 특성은 머플러 자체보다는 배관과 차량 하부 장착 방식에 있음. 배관은 크기가 맞아야 하고 앞에서 뒤로 제대로 구부러져야 함. 머플러와 팁만 교체하려면 부품을 개별 구매해서 정비소에서 기존 부품을 제거하고 새것을 용접하는 방식으로 합리적인 비용에 할 수 있음. "캣백"(촉매 컨버터부터 팁까지 전체) 교체를 원하면 맞춤형 배관이 필요해 비용이 더 들 수 있음. 이 경우 성능 영향을 정확히 예측하기 어려운데, 단일 머플러는 OEM 머플러와 비교해 다른 모델 차량에서 다르게 작동할 수 있기 때문임.

출처

이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

다른 차종의 머플러 교환 사례

차량 정보 없음

Oooh, that's a decent idea of using separate portage for BBB, M11rph. The Aston is back from it's service and all is well. I dropped it off at J H Pearce on Monday at the tiny little Fairoaks Airport near Chobham. Josh took a look at where the leak was coming from (dripping from the latch in the boot) and suggested it was the high level brake light. An Aston dealer would have replaced the light and the gasket for £1million but he said a small dab of sealant would probably do the job just as well. He found a bunch of the heat shields around the exhaust were rattling and falling off so he re

차량 정보 없음

공회전 상태에서 고온일 때 연기 발생. A/F 비율이 0.980으로 배기가스가 과농축. LTFT는 +12. MAF는 2.2그램. 그램을 증가시키면 LTFT는 올라가고 A/F는 0.966으로 내려감.

포르쉐

포르쉐 카이엔

soad said: The 400 has an Active Performance Exhaust, no wonder it sounds good. Those side windows/doors easily come off? Wouldn t feel too secure parking in a city.Good photos of the scenery - 911 going through a puddle! I had look back at the photos to see what you meant, I’d seen the pic but not noticed the puddle, I was far to interested in the Morgan peeping around behind the 911. A lovely looking thing, it would be my choice and I’ve always been a 911 fan.

차량 정보 없음

TV8 said: The car has been locked in the garage for a few weeks as I recovered from some surgery and having to much time on my hands resulted in me buying a new exhaust system. It was fitted this week and overall sounds good but something isn't quite right and reading up tonight, hopefully, some adjustments will improve the situation!It certainly looks good!These "bypass" pipes (assuming they're not Helmholtz resonators) look like a Gundo hack type arrangement to increase noise levels.The whole system looks somewhat poorly conceived, overly complex in its Mk2 guise, and poorly executed, to th