쇼크업소버 교환 수리 사례
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 6. 30. 작업
난이도 & 준비물
증상
후측(서스펜션?)에서 쿵쿵거리는/딱딱거리는 소음 발생
처리 내용
후측 서스펜션에서 나는 딱딱거리는 소음의 원인은 여러 가지가 있을 수 있습니다. 먼저 버싱(부싱)이 마모되어 금속끼리 접촉하거나, 스웨이 바 엔드 링크가 손상되었거나, 쇼크 마운트(상단 또는 하단)가 마모된 경우를 의심해볼 수 있습니다. 가능하면 후측 타이어를 빼고 서스펜션 마운트를 검사하여 고무 부분 균열이나 마모된 부분이 있는지 확인하세요. 여러 번의 딱딱거림 소음과 함께 차량 후측의 과도한 바운싱이 동반된다면, 쇼크가 손상된 것으로 판단할 수 있습니다.
출처
이 사례는 Stack Exchange에서 수집한 데이터입니다.
신뢰도 2.5점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗다른 차종의 쇼크업소버 교환 사례
포르쉐 카이엔
M138 said: Clad-Hach said: For me everything about Maserati screams run a mile, why would anyone buy a car from a brand with a reliability record arguably worse than a JLR product.Yes some of them look good but if you're stuck on the hard shoulder that would be the last thing on your mind.If you take a similar vintage Porsche 996 compared to a Maserati 4200, the Maserati engine is bulletproof compared to the Porsche engine. Where Maserati falls short is something like a suspension part on a Maserati 4200 that is nla.The availability or price of parts on a Maserati can quite rightly receive c
미니 쿠퍼
하부 볼 조인트가 녹슬고 손상되어 있으며, 여러 부품들이 부식된 상태. 분해 및 해체 작업 진행 중.
토요타 코롤라
Ste372 said: pocketspring said: The Celica had it's own engine line up, the 4AGE wasn't used in them. It was used in the Corolla GTi though.Yes I know it wasn't used in the Celica what I'm getting at is it would of upset the applecart. If it had a 4age in it. It would of been as quick, if not quicker than the Celica so why would anyone have spent double on buying a Celica every car has its place in a manufacturers line up. This was placed in the budget friendly coupe. Do you think putting the 1.6L 112bhp 4AGE engine in the Paseo would have made it quicker than the 2.0L 173bhp 3SGE engine mk6
BMW 5시리즈
mwstewart said: I'm going to treat it to a set of Bilstein B8 dampers and new OEM springs.I'm a bit surprised that Mr "American-spec non-sport" is planning to buy some B8 dampers:1. I can't recall whether you've fitted lowering springs to the Corsa (or if the ecoFLEX model is fitted with them as standard), but aren't B8s for cars with lowering springs, whereas B6s are for standard springs?2. When various BMW guys on here fit Eibach lowering springs to their cars, they tend to fit B4S dampers as they've found B8s to be too firm.