쉐보레
쇼크업소버 교환미국 · Stack Exchange★ 신뢰도 4.1 (높음)

쉐보레 말리부 수리 사례

8G (2015-2023) · 1.5T 자동

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 8. 13. 작업

난이도 & 준비물

난이도 보통⏱ 예상 120~240🔧 리프트🔧 특수공구

증상

1963 Chevy Impala 드럼 브레이크 재조립 중 내부 부품 부족 문제. Self adjuster, brake strut, parking brake lever 등 여러 부품이 없어짐. 개별 부품을 찾아야 하는지, 아니면 다른 모델과 호환되는 부품이 있는지 확인 필요.

처리 내용

"all-in-one" 또는 "combo" 브레이크 드럼 하드웨어 키트를 찾아보세요. RockAuto.com 등 주요 부품점에서 구입 가능합니다. 이 키트는 한 액슬용이며, 추가 부품(self adjuster 등)도 같은 곳에서 구입할 수 있습니다. 1963 Impala는 GM "B" 플랫폼 기반의 풀사이즈 RWD 차량으로, Buick Wildcat, Oldsmobile Dynamic 88, Pontiac Bonneville & Catalina 등과 같은 플랫폼을 사용합니다. 여러 연식에서 동일한 드럼 브레이크 키트를 찾을 수 있을 가능성이 높습니다. Strut와 parking brake lever가 더 이상 생산되지 않는 경우, 호환되는 중고 부품이나 다른 GM 차량의 호환 부품을 찾아야 할 수 있습니다.

출처

이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

다른 차종의 쇼크업소버 교환 사례

포르쉐

포르쉐 카이엔

M138 said: Clad-Hach said: For me everything about Maserati screams run a mile, why would anyone buy a car from a brand with a reliability record arguably worse than a JLR product.Yes some of them look good but if you're stuck on the hard shoulder that would be the last thing on your mind.If you take a similar vintage Porsche 996 compared to a Maserati 4200, the Maserati engine is bulletproof compared to the Porsche engine. Where Maserati falls short is something like a suspension part on a Maserati 4200 that is nla.The availability or price of parts on a Maserati can quite rightly receive c

미니

미니 쿠퍼

하부 볼 조인트가 녹슬고 손상되어 있으며, 여러 부품들이 부식된 상태. 분해 및 해체 작업 진행 중.

토요타

토요타 코롤라

Ste372 said: pocketspring said: The Celica had it's own engine line up, the 4AGE wasn't used in them. It was used in the Corolla GTi though.Yes I know it wasn't used in the Celica what I'm getting at is it would of upset the applecart. If it had a 4age in it. It would of been as quick, if not quicker than the Celica so why would anyone have spent double on buying a Celica every car has its place in a manufacturers line up. This was placed in the budget friendly coupe. Do you think putting the 1.6L 112bhp 4AGE engine in the Paseo would have made it quicker than the 2.0L 173bhp 3SGE engine mk6

BMW

BMW 5시리즈

mwstewart said: I'm going to treat it to a set of Bilstein B8 dampers and new OEM springs.I'm a bit surprised that Mr "American-spec non-sport" is planning to buy some B8 dampers:1. I can't recall whether you've fitted lowering springs to the Corsa (or if the ecoFLEX model is fitted with them as standard), but aren't B8s for cars with lowering springs, whereas B6s are for standard springs?2. When various BMW guys on here fit Eibach lowering springs to their cars, they tend to fit B4S dampers as they've found B8s to be too firm.