스바루
쇼크업소버 교환미국 · Stack Exchange★ 신뢰도 4.1 (높음)

스바루 레거시 수리 사례

7세대 (2019-현재) · 2.5i

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 7. 31. 작업

난이도 & 준비물

난이도 보통⏱ 예상 120~240🔧 리프트🔧 특수공구

증상

'07 Subaru Legacy에서 냉시동 시 도넛 가스켓 아래에 물방울이 가끔 생기고 축축한 배기음 냄새가 난다. OEM 신품 가스켓과 스프링을 사용했으며 마주보는 면을 정리했다(표면이 부드러워 보이지만 충분하지 않을 수 있음). 1인치 높아진 후방 스프링 외에는 개조 없음.

처리 내용

물은 연료 연소의 부산물로 일반적으로 배기관 끝으로 증기 상태로 배출된다. 소량이 액화되는 것은 일반적이며 문제가 아니다. 다만 물방울은 보통 배기관 끝에서 보이지, 중간에서는 보이지 않는다. 더 중요한 질문은 "엔진 운전 중 이 결합부에서 배기가 새는가?"이다. 그 위치의 물방울이 배기 누수를 나타낼 수 있다는 우려가 있다. 이는 쉽게 점검할 수 있다. 조수가 필요하다. 엔진을 시동하고 조수가 행주로 배기 흐름을 가만히 막도록 한다(1초 정도만). 바나나를 배기관에 넣는 방식은 하지 말 것(Eddie Murphy Beverly Hills Cop 참조). 이 결합부에서 배기가 새는가? 안전주의: 엔진이 운전 중인 차 아래로 들어가지 말 것. 누수가 있으면 3피트 떨어진 곳에서도 음향으로 감지할 수 있다.

출처

이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

다른 차종의 쇼크업소버 교환 사례

포르쉐

포르쉐 카이엔

M138 said: Clad-Hach said: For me everything about Maserati screams run a mile, why would anyone buy a car from a brand with a reliability record arguably worse than a JLR product.Yes some of them look good but if you're stuck on the hard shoulder that would be the last thing on your mind.If you take a similar vintage Porsche 996 compared to a Maserati 4200, the Maserati engine is bulletproof compared to the Porsche engine. Where Maserati falls short is something like a suspension part on a Maserati 4200 that is nla.The availability or price of parts on a Maserati can quite rightly receive c

미니

미니 쿠퍼

하부 볼 조인트가 녹슬고 손상되어 있으며, 여러 부품들이 부식된 상태. 분해 및 해체 작업 진행 중.

토요타

토요타 코롤라

Ste372 said: pocketspring said: The Celica had it's own engine line up, the 4AGE wasn't used in them. It was used in the Corolla GTi though.Yes I know it wasn't used in the Celica what I'm getting at is it would of upset the applecart. If it had a 4age in it. It would of been as quick, if not quicker than the Celica so why would anyone have spent double on buying a Celica every car has its place in a manufacturers line up. This was placed in the budget friendly coupe. Do you think putting the 1.6L 112bhp 4AGE engine in the Paseo would have made it quicker than the 2.0L 173bhp 3SGE engine mk6

BMW

BMW 5시리즈

mwstewart said: I'm going to treat it to a set of Bilstein B8 dampers and new OEM springs.I'm a bit surprised that Mr "American-spec non-sport" is planning to buy some B8 dampers:1. I can't recall whether you've fitted lowering springs to the Corsa (or if the ecoFLEX model is fitted with them as standard), but aren't B8s for cars with lowering springs, whereas B6s are for standard springs?2. When various BMW guys on here fit Eibach lowering springs to their cars, they tend to fit B4S dampers as they've found B8s to be too firm.