푸조
일본 · みんカラ★ 신뢰도 3.0 (보통)

푸조 3008 수리 사례

E3008 (2024-현재) · 일렉트릭 AWD

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 8. 14. 작업

증상

푸조 508SW (왜건)(R8) | 에어컨 필터 교환 | 공정1: BOSCH 필터 | 공정2: 사용済み. 새 필터에는 이 당기는 부분이 없었음

처리 내용

プジョー 508SW (ワゴン)(R8)|エアコンフィルター交換|工程1:BOSCHのフィルターを|工程2:使用済み。新しいフィルターにはこの引っ張るところがついてなかった

출처

이 사례는 みんカラ (일본)에서 수집한 데이터입니다.

신뢰도 3.0점(보통) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

푸조 3008 다른 정비 사례

배터리 교환일렉트릭 AWD

푸조 208 1.2 Puretech 82hp 자동 에어컨이 며칠 주차 후 작동 중지. 송풍이 전혀 나오지 않음. 에어컨 디스플레이와 버튼은 정상 작동하며(뒷창 디프로스트 제외), 조작해도 반응 없음. 주행 후에도 변화 없음. 보조 벨트는 양호한 상태. 실내필터는 약 6개월 경과.

엔진오일 교환1.6T 자동

Hello all,…. my first post on PH, so apologies if all is not as expected.I have found for sale an unsold ‘brand new’ Peugeot 5008 (actually, there are three), build year 2023; at what seems to be a very good price. However, the car is in Singapore and only shows 12km of driving. It still has the factory bodywork wrappers and the plastic seat covers on. It is the Allure Premium version, and with a full Panoramic opening/sliding roof and front heated seats.With all import duties, VAT, customs fees, delivery and licensing, etc; the total cost to me would be around £16,500 - providing nothing unto

엔진오일 교환1.6T 자동

Hello all,…. my first post on PH, so apologies if all is not as expected.I have found for sale an unsold ‘brand new’ Peugeot 5008 (actually, there are three), build year 2023; at what seems to be a very good price. However, the car is in Singapore and only shows 12km of driving. It still has the factory bodywork wrappers and the plastic seat covers on. It is the Allure Premium version, and with a full Panoramic opening/sliding roof and front heated seats.With all import duties, VAT, customs fees, delivery and licensing, etc; the total cost to me would be around £16,500 - providing nothing unto

브레이크 패드 교환일렉트릭 AWD

푸조 106(S2) | 퀵시프트② | 공정1: 이전에 퀵시프트화를 위해 장착한 부품으로는 충분한 수준의 시프트 거리 단축을 달성하지 못했으므로, 추가로 거리를 단축할 수 있는 부품을 장착하기로 결정. COMPBRAKE 메이커의 부품 사용 | 공정2: 시프트로드는 순정품을 사용하기 위해 순정로드에서 볼을 제거 | 공정3: 그라인더를 사용하여 절단 홈을 만들면 쉽게 제거됨 | 공정4: 순정 볼을 제거한 후 순정로드를 COMPBRAKE 볼에 통과시킨 후 볼의 상하에 사진의 링을 사용하여...