Stack Exchange★ 신뢰도 2.5 (참고용)

수리 사례

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 6. 30. 작업

증상

Why do cars die after removing jumper cables?

처리 내용

It's because of a couple things: The battery is very dead and the alternator cannot put out enough power at idle RPMs to run the whole system and charge a battery. This leads to a lack of power which may kill one or more systems most likely the spark "ignition" system since this takes the most power and is necessary to run the car. In Fact you can remove the battery all together making sure the positive cable is insulated and run the car that way too. At Least once you get it started. Andre Borie has a good point. removing the battery can potentially cause damage to some of the more delicate electronics in the car. This is due to the battery acting like a big capacitor smoothing out some of the larger spikes in the electrical system. These spikes can originate from many different sources: the alternator, power surges from the coil packs, or even a wire crossing something like a spark plug wire causing some induction. kmarsh below has a good point here is a video on how a self starting

출처

이 사례는 Stack Exchange에서 수집한 데이터입니다.

신뢰도 2.5점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗