수리 사례

2026. 6. 30. 작업

증상

Testing specific wires in harness cable

처리 내용

This is quite easy, but you need to do yourself a favor and get a factory wiring diagram. It will save you hours of frustration and confusion. The factory wiring diagrams will tell you exactly when the circuits are active and when they aren't. On top of that they will tell you the colors and sometimes the current flow. You really don't want to hook up a tail light to a fan circuit (Personal experience) =P Once you have that, you'll need some thin wire probes or insulation piercing probes. They come with the Power Probe 3, and fluke also sells them. A decent multi-meter should help you track down the wires you want to use. If you decide that you want to use your own method to pierce the wires, just remember to wrap them in high temp electrical tape. When insulation gets compromised the entire wire inside it can corrode. It's a real pain to try and figure that out. If you want to try to sort this out the oldschool way you can use the multi-meter, probes, and a test light. Essentially wha