총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 6. 30. 작업
Can't start a Kawasaki GPX 750
Your carbs are clogged with varnish and bad gas The remnants of gas that has evaporated are a gummy hard varnish inside of your carburetors. You have a bit of work to do. You need to completely disassemble the carburetors and thoroughly clean all of the nooks, crannies, jets, fuel galley's and air galley's in order to get your bike back in working order. The entire bank of 4 carbs requires removal and cleaning. You can dunk the entire set in a 'bath' of solvent to eat away the dried up gas or 'varnish' and to soften it up. Afterword you will need to take carb cleaner and 'blow out' all of the fuel galley's. Additionally you will need to unplug your jets with a small wire and/or compressed air. This varnish is preventing fuel from getting into your motor. You will need to clean the entire fuel system, especially the gas tank. You may have some rust in your gas tank as well. The petcock is probably clogged and may need a rebuild kit for it to replace the plastic screen. You will need to
출처
이 사례는 Stack Exchange에서 수집한 데이터입니다.
신뢰도 2.5점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗